Ningbo Inno Technology Co., Ltd.
Main products:Pool Alarm,PIR Motion Detector,Burglar Alarm,Alarm System,Door Window Alarm,Personal Alarm
Products
Contact Us
  • Contact Person : Mr. Tan Stephen
  • Company Name : Ningbo Inno Technology Co., Ltd.
  • Tel : 86-574-87914443
  • Fax : 86-574-87911180
  • Address : Zhejiang,Ningbo,1177#, Lingyun Road, Hi-Tech Zone
  • Country/Region : China
  • Zip : 315040

Waterproof Lock with Alarm

Waterproof Lock with Alarm
Product Detailed
Waterproof Lock 1.completely waterproof 2.used for door, car, bike etc. 3.cable lock with adding alarm 4.soud level is 110

This Waterproof Lock is a hardened steel cable lock which has an in-built alarm which will omit a siren of 110 decibels if touched or tampered with in any way thus alerting you to unwanted attention. The waterproof lock is a new concept in cable lock systems which will deter any attempted theft or break-in whilst alerting you if in close proximity.  A great product that spins an edge on the old padlock systems which can be used for a multitude of equipment including Sheds and out buildings, gates, garages and lockups, motorbikes, bicycles, trailers, caravans, garden machinery, lawnmowers, toolboxes, gas cylinders, diesel tanks etc.

 1) The lock and the alarming function are united into a whole. The lock pole adopts the inserting type by two steps. The first step only can locked can't give an alarm; the second step can either locked or give alarm.

2) The alarm power supply is directly fixed in the lock body, which is safe and do not cause any damage to the battery and the circuit of the vehicle.

3) Overcome the weakness of stealing the whole car. Usage directions of the Alarm lock:

A. The lock pole lock the first step, in this way, it is only developing the lock's effect, but not giving an alarm.

B. If it is necessary to install the alarm, please use the key to twist the key core as to make the lock pole lock the second step when you will hear the sound "Du" which means it is coming into the alarming station after 15 seconds. When the lock body is vibrated, it needs 5 seconds to vibrate again then give an alarm. After that it will alarm with every vibrated. Since it hasn't vibration in 35s after the alarm is over, it will returns to original alertness.

C. It will remind you by sudden stop alarm when the battery runs out, the battery are needed replaced.

D. When replacing battery, pull the lock core out with the key, then remove those two screws by the lock hole, take out the alarm device case, insert a small screwdriver in order to pry up the battery case, and replace the old battery by a new one with careful attention to the battery polarity.

Protect your assets NOW! 

Features: 

1) Can be used on: bike, scooter, door, car steering wheel, window, toolbox, truck, trailer, boat, shed, side gate, container, public storage unit, cart, garden machinery, locker, lockroom , etc.;

2) 105-110 db alarm sound;

3) Auto-alarming system & locking system;

4) Can be used alarmed or unalarmed states;

5) Automatic alarm reset;

6) Shake, shock, move or vibrate sensor;

7) Resistant corrosion, resistant bad weather, resistant physical destory, waterproof;

Waterproof Lock with Alarm



Copyright Notice @ 2008-2012 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.